‘Holly’ Bullseye Murrine Mix

14.5g (40+ chips) of murrine made from 100% bullseye glass and designed for glass fusing.


Out of stock

Free shipping for international orders over £35

For all your festive fused glass makes! A mix of deep green and bright red – perfect for the season.

What you get:
40+ usable chips in a little tin. Every chip will be between 5.5 and 7mm and will show the designs pictured when fused (first picture). You will NOT get chips with minimal/no design, or wonky chips.

The chips are made from Bullseye glass, constructed and pulled by hand in a lampworking flame (not in a vitrigraph kiln) by me in my workshop. The chips are designed to be used in fusing, and vary in size between 5.5 and 7mm diameter and 3-6mm high. They can be used on top of two sheets of 3mm fusing glass to add that special something to your fused glass pieces. They work really well when used as eyes, baubles, or flowers.

You will receive a tin containing at least 14.5 grams of murrine, at least 40 chips. These will be a random mix of the four designs. The chips are hand-cut with care to ensure the sides are as straight as possible, and then ultrasonically cleaned to minimise production dust and grease and improve the final fused result.

*A note on compatibility*

Checking for compatibility is especially important when using flame worked elements in kiln forming. This is because the flameworking stage exposes the glass to temperatures outside the usual kiln forming range. This can, on occasion, cause the glass to become incompatible. I take compatibility very seriously, and every item I sell for use in glass fusing has been tested for compatibility using the Polaroid film test; full fused above two layers of 3mm tekta. However, if you are planning on using the murrini differently to this, you should conduct your own compatibility test.

Weight15 g


There are no reviews yet.

Be the first to review “‘Holly’ Bullseye Murrine Mix”

Your email address will not be published. Required fields are marked *